Last updated: 2025 BLS data · Page refreshed:
How much does a Electro-Mechanical and Mechatronics Technologists and Technicians actually take home in North Dakota?
Progressive (up to 2.5%) — 20.7% effective total tax rateData: BLS OEWS 2025 + IRS/State Tax Brackets 2024 • Updated 2026-05-19
Detailed line-by-line tax calculation for a Electro-Mechanical and Mechatronics Technologists and Technicians earning $82,820 in North Dakota (single filer, standard deduction).
| Tax Component | Annual Amount | Effective Rate |
|---|---|---|
| Gross Salary (Median) | $82,820 | — |
| Federal Income Tax | -$10,061 | 12.1% |
| North Dakota State Income Tax | -$742 | 0.9% |
| Social Security (OASDI) | -$5,134 | 6.2% |
| Medicare | -$1,200 | 1.5% |
| Total Taxes | -$17,139 | 20.7% |
| Take-Home Pay | $65,680 | 79.3% |
Take-home pay varies significantly across experience levels. Here is the after-tax breakdown for each salary percentile of Electro-Mechanical and Mechatronics Technologists and Technicians in North Dakota.
| Percentile | Gross Salary | Total Taxes | Take-Home Pay | Tax Rate |
|---|---|---|---|---|
| 10th Percentile (P10) | $62,570 | -$10,740 | $51,829 | 17.2% |
| 25th Percentile (P25) | $73,350 | -$14,147 | $59,202 | 19.3% |
| Median (P50) | $82,820 | -$17,139 | $65,680 | 20.7% |
| 75th Percentile (P75) | $100,190 | -$22,628 | $77,561 | 22.6% |
| 90th Percentile (P90) | $137,020 | -$34,705 | $102,314 | 25.3% |
After federal income tax ($10,061), state tax ($742), and FICA ($6,335), a Electro-Mechanical and Mechatronics Technologists and Technicians in North Dakota takes home $65,680 per year — or $5,473 per month. The effective tax rate of 20.7% is relatively low compared to the national range.
With an effective total rate of 20.7%, a Electro-Mechanical and Mechatronics Technologists and Technicians in North Dakota keeps $65,680 of $82,820 gross — roughly typical for U.S. middle-income earners once federal, FICA and state taxes are combined.
North Dakota uses a progressive state income tax, so brackets escalate as wages rise. For this Electro-Mechanical and Mechatronics Technologists and Technicians salary the state tax works out to $743 (0.9% effective) — on top of federal and FICA.
Federal income tax ($10,061) accounts for 59% of the total tax bill — the single largest deduction. FICA adds $6,336 (37%), and state tax the remaining $743 (4%).
A Electro-Mechanical and Mechatronics Technologists and Technicians earning this gross in a no-income-tax state (e.g., Texas, Florida) would take home approximately $66,423 — only $743 (1.1%) more than in North Dakota.
For Electro-Mechanical and Mechatronics Technologists and Technicians after-tax pay, North Dakota ranks #3 of 40 states — top quartile. High gross wages or low state-tax burden (or both) drive the strong ranking.
Translated into paycheck cadences, $65,680 net/year works out to $5,473/month or $2,526/bi-weekly for this Electro-Mechanical and Mechatronics Technologists and Technicians in North Dakota — the numbers that actually hit a checking account after every deduction.
Where does a Electro-Mechanical and Mechatronics Technologists and Technicians keep the most of their paycheck? Top 10 states ranked by after-tax take-home pay.
North Dakota ranks #3 out of 40 states for Electro-Mechanical and Mechatronics Technologists and Technicians after-tax take-home pay.
A Electro-Mechanical and Mechatronics Technologists and Technicians in North Dakota earning a median salary of $82,820 will take home approximately $65,680 per year after federal income tax ($10,061), state income tax ($742), and FICA ($6,335). That is $5,473 per month or $2,526 per bi-weekly paycheck.
The effective total tax rate for a Electro-Mechanical and Mechatronics Technologists and Technicians in North Dakota is 20.7%, broken down as: federal income tax 12.1%, North Dakota state tax 0.9%, and FICA (Social Security + Medicare) 7.6%. This assumes a single filer with the standard deduction for 2024.
North Dakota has a progressive (up to 2.5%). On a Electro-Mechanical and Mechatronics Technologists and Technicians's median salary of $82,820, the state income tax amounts to $742 per year, which is an effective state rate of 0.9%.
After all taxes, a Electro-Mechanical and Mechatronics Technologists and Technicians in North Dakota takes home approximately $5,473 per month, or about $31.58 per hour (based on a standard 2,080-hour work year). These figures assume a single filer, standard deduction, and no additional pre-tax deductions.
We start with the 2025 BLS median salary of $82,820 for Electro-Mechanical and Mechatronics Technologists and Technicians in North Dakota, then subtract: federal income tax using 2024 IRS brackets ($14,600 standard deduction), North Dakota state income tax (progressive (up to 2.5%)), Social Security (6.2% up to $168,600), and Medicare (1.45%). The result — $65,680/yr — does not include local taxes, pre-tax deductions (401k, HSA), or tax credits.
Some links are affiliate links. See our disclosure.
This estimate assumes a single filer using the 2024 standard deduction ($14,600), with W-2 employment income only. It does not account for: itemized deductions, tax credits (e.g. earned income credit, child tax credit), local/city taxes, pre-tax contributions (401k, HSA, FSA), self-employment tax, or additional income sources. Actual take-home pay may differ. Consult a tax professional for personalized advice.
Our Methodology · Data Sources · Salary: BLS OEWS · Tax: IRS + State DOR